| PA6 pure nylon rod of the new material |
| Color: milky white translucent |
Material specifications: bar |
| Bar: diameter (Ø8-200) Length: 1,000 |
| Features: with decay, light weight, low noise, self-lubricating properties, contained in low light conditions, can be realized without lubrication oil, the density of small, light weight, copper was only 1 / 8, is the resistance of copper The 6-fold, and low noise, small coefficient of friction, the only alloy of Pap 1 / 3, the ability of the weak acid and weak base corrosion, mechanical properties and stability, cutting processing. |
| Disadvantages: water fast speed, strength and rigidity with the increase in the temperature lower. |
| Uses: widely used in the manufacture of a variety of industrial machinery, instruments, electrical components, such as bearings, gears, couplings, cam, impeller pumps, fan blades, oil gasket, valve parts, a variety of bush, and so on. |
| 1 The appearance of physical properties: was milky white translucent, without mechanical impurities |
| Density |
g/cm3 |
ASTM D-792 |
1.14 |
| Shrinkage |
1/8″,Dry |
|
0.012 |
| Flame retardant |
1.5mm |
UL 94 |
V-2 |
| Humidity |
Saturation |
ASTM D570 |
9.50% |
| 2 Mechanical Properties |
| Yield to tensile strength |
23℃,Dry |
ASTM D-638 |
79 |
| Bending strength |
23℃,Dry |
ASTM D-795 |
110 |
| Elongation at break |
23℃,Dry |
ASTM D-638 |
55 |
| Rockwell hardness |
Dry |
|
119 |
| IZOD notched impact strength |
23℃,Dry |
ASTM D-256 |
60 |
| 3 Hot Properties |
| Heat distortion temperature |
1.80Mpa,Dry |
ASTM D-648 |
65℃ |
| Melting Point |
Dry |
ASTM D-3418 |
220℃ |
| Linear expansion coefficient |
Dry |
ASTM E-831 |
0.83×10-4 |
| 4 Electrical Properties |
| Volume resistivity |
|
ASTM D-257 |
>1013 |
| Dielectric strength |
1.5mm,Dry |
ASTM D-149 |
22 |
| Note: The above information was provided by a variety of physical properties of typical, and the only reference guide processing. | |
